CONVEYORS AND PLATFORMS
Unified Flex has Conveyors and Platforms to customize your solutions:
Inclined Belt Conveyor | Screw Conveyor | Z Bucket Conveyor | Mezzanine Platform.
Unified Flex presents Inclined Belt Conveyor
The Inclined Belt Conveyor lifts the product from a lower level to a Multihead / linear scale suspended over the bagging machine. These conveyors come with vibratory hoppers that can store product in bulk and slowly meter the required amount of product on the belt. Height and width of the conveyors can be customized to meet the requirements of the bagging machine and weigher. Various type of belts are available including rubber belts, plastic belts, cleated plastic belts and cleated rubber belts. Inclined conveyors can be mounted on casters or railings to move for easy sanitization. The Inclined Belt Conveyor is an excellent option for wet products including vegetables, fruits, IQF frozen products as it has a plate at the bottom to collect all the dripping water. It can also be used for dry or pre-packaged products as well.
Height: 2 – 5 m | Speed: 40 metres/min
• 7 ft – 18 ft high product drop
• Stainless Steel vibratory hopper with adjustable vibrations
• Sealed bearings
• Customized design
• Variable speed drive for best performance.
• Heavy duty drive chain system
• Easy access for water holding plate drainage and rinsing.
• Cleated conveyor belt with 2-inch side skirt
• Rubber/plastic belt conveying material
• All necessary motors and controls
• Stainless Steel over all construction
• Necessary covers and guards
| Standard technical data | Inclined Belt Conveyor |
| Discharge Height | 2 - 5m |
| Width | 18 - 36 inches (customizable) |
| Speed | up to 42 meters per minute |
| Hopper | 30 litres - 60 litres |
| Electrical | AC single phase 220V/60 Hz |
• Customized width and height
• Customized bulk hopper
At Unified Flex we believe in empowering our customers. We use non-proprietary off the shelf parts on all our machines. Click on the link below to find out more.
At Unified Flex we believe service is equally important as manufacturing high-quality equipment. We offer a wide variety of pre-delivery and post-delivery services. Click on the link below to find out more.
• VFFS bagger
• Pre Formed Pouch Bagger
• Weighing Scales
Unified Flex presents Screw Conveyor
The Screw Conveyor aids in lifting the product from a ground level loading hopper to the filling machinery. Screw conveyor comes with a vibratory hopper. Vibrations can be set according to the product flow. Vibrations on the hopper assist in keeping the flow of the product moving without binding or creating air pockets. Screw is constructed with #304 Stainless Steel for food processing. Screw conveyors can communicate with the filling equipment to maintain a good flow of product for portioning. Ideal for free flowing powdery products, such as ground coffee, milk powder, flour, grounded spices, nutritional chemicals and other industrial powders.
Height: 2 – 6 m | Volume: 150L | Speed: 3T/hr.
• Stainless Steel (#304) Construction for Sanitary use
• Vibratory Hopper with volume of 150 L capacity
• Discharge Height up to 1870 mm (customized)
• Conveying capacity of 3-5 cbm/ hour
• Screw machined from single shaft with precision
• A/C motor to drive the screw inside the shaft
• Photo electric sensor to control the feed rate to the filler
• Optional Integration with bagging machine
• Optional casters.
| Standard technical data | Screw Conveyor |
| Discharge Height | 2 - 6m |
| Electrical power supply | AC single phase 220V/60 Hz |
| Capacity | 3T /hr |
| Construction | Stainless Steel |
•VFFS integration
• Casters
At Unified Flex we believe in empowering our customers. We use non-proprietary off the shelf parts on all our machines. Click on the link below to find out more.
At Unified Flex we believe service is equally important as manufacturing high-quality equipment. We offer a wide variety of pre-delivery and post-delivery services. Click on the link below to find out more.
To learn more, click on desired markets below.
• Auger filler
• VFFS bagger
• Pre Formed Pouch Bagger
• Weighing Scales
Unified Flex presents Z Bucket Conveyor
The Z Bucket Conveyor aids in lifting the product from a lower level to the Multihead / Linear scale suspended over the bagging machine. This conveyor is a very important part of the Turnkey packaging system as it maintains a consistent flow of product to the weighing scale. If the flow of product is not consistent, weight inaccuracies can arise during the packaging process. These conveyors come with vibratory hoppers that can store product in bulk and slowly meter the required amount of product on the belt. Height of the conveyors can be customized to meet the requirements of the bagging machine and weigher. Buckets are made from food grade plastic and the surface is dimpled to ensure non-stick contact of products. The Z Bucket Conveyor is an excellent option for snack foods, pet foods grains and similar products.
Discharge Height: 2 – 5 m | Min Capacity: 1 m3/hr. | Max Capacity: 5 m3/hr
• 7 ft – 18 ft high product drop
• Stainless Steel Vibratory Hopper
• Vibration frequency control for metering consistency
• Communication with Weighing machine for product transfer
• 1.6 Liter capacity food grade plastic buckets
• Durable heavy-duty motor for round the clock operation.
• Easy to clean removable panels and buckets
• Product lifting Swing Link buckets
• Automatic or Jog Mode Selection
• Emergency stop push button
• ON/ Off Selector switch
• Heavy duty 3 Phase driving motor
• All necessary motors and controls
• Stainless Steel over all construction
| Standard technical data | Z Bucket Conveyor |
| Discharge Height | 2 - 5m |
| Width | 26" |
| Speed | Up to 42 metres per min. |
| Hopper | 30 Litres - 60 Litres |
| Electrical | 220 Volt, 1 Phase, 60 hz. |
• Enclosed Stainless Steel
• Customizable height
• Customizable bulk hopper
At Unified Flex we believe in empowering our customers. We use non-proprietary off the shelf parts on all our machines. Click on the link below to find out more.
At Unified Flex we believe service is equally important as manufacturing high-quality equipment. We offer a wide variety of pre-delivery and post-delivery services. Click on the link below to find out more.
• VFFS bagger
• Pre Formed Pouch Bagger
• Weighing Scales
Unified Flex presents Stainless-Steel Mezzanines for Combination Scales
The Stainless-Steel Mezzanines for Combination Scales is used to safety install the Multihead Weigher on top of the bagging machines. Mezzanine platforms provide a stable mounting surface for Multihead Scales. If a Multihead Scale is not mounted on a stable surface it can result in inaccurate weighments. They also allow for easily removing contact surfaces parts of the Multihead scale for sanitizing. 1 – 2 persons can easily perform sanitizing and maintenance tasks on the mezzanine platform. Our Mezzanines are built with #304 Stainless Steel for food safety. Side railings are mounted on the platform and stairs for user’s safety and convenience. Our Stainless-Steel Mezzanines for Combination Scales come in various standard sizes and are available in customized sizes as well.
Height: 6 ft – 8 ft (customizable) | Sizes: 6′ x 6′ / 8′ x 8′ / 12′ x 12′
• Variable Servo‐driven auger
• Independent agitation drive
• All stainless steel contact parts
• No‐tools removable change parts
• Augers machined from solid
• Colour touch‐screen control
• PLC based controls
• 5g to 2kg fill range
• 50 Liter feed hopper
• VFFS applications Controller integrated
| Standard technical data | AF-100 Auger Filler |
| Drive | Servo Motor, 4.8Nm/7.5Nm/14.4Nm |
| Mixing Motor | 0.5 Hp |
| Agitation Drive | Continuous / Fill Only / No Agitation |
| Agitation Options | 5g to 2Kb (screw changeover) |
| Fill Weight Range | |
| Machine Height | 3560 mm / 81.1" |
| Machine Width | 1510 mm / 31.9" |
| Machine Length | 1460 mm / 33.9" |
| Machine Weight | 200Kg / 1,320 lbs |
| Weighing Accuracy | Product (Powder) dependent |
| Electrical Power Supply | AC single phase 220V/60 Hz |
| Power Consumption | 1.2 KW |
• Alternative Servo Motor Sizes
• Product Contact Parts in 316L Stainless Steel
• Check Scale Feedback
• Customized Filling Hoppers
At Unified Flex we believe in empowering our customers. We use non-proprietary off the shelf parts on all our machines. Click on the link below to find out more.
At Unified Flex we believe service is equally important as manufacturing high-quality equipment. We offer a wide variety of pre-delivery and post-delivery services. Click on the link below to find out more.
• VFFS bagger
• Preformed Pouch Bagger